focus lpos on < lens position > Configures the thermal head to fix the specified lens-position. The thermal head focus is configured for mode 1 ( fixed lens-position mode ). This command is intended to aid the flexo project setup the second stage focus adjustment. The thermal head is fixed at a lens-position that is consistent with the command "head install on" and the second stage focus adjustment is set to simulate the thickness of Kodak IR plates. As a result, the thermal head will think it is imaging media with a thickness of ~305um while in fact the thickness is >1cm. Enables the fixed lens-position mode at the position specified by <position>. The position is an integer ranging from -500um to 500um. Gravure Japanese_Newspaper_OEM_Engine Lotem_Quantum Magnus_400 Magnus_800 Magnus_VLF Slave_MCE_Firmware Thermoflex Think_Motion_Controller Trendsetter_400/800 Trendsetter_NEWS Trendsetter_Series_4 This command is available. Field 27-Jun-2002 ..\..\ShowAllErrors.htmFirmware 1 Error Index ..\..\ShowAllCommands.htmFirmware 1 Command Index ..\..\ShowAllParameters.htmFirmware 1 Parameter Index Updated: Thu Jul 17 07:24:42 2008 PST